There are 415 products
Show 415 products

Max pressure (bar) info

Kv value (m3/h) info

Degree of protection (IP)

Max temperature (°C)

plastic solenoid valves

Plastic solenoid valves are widely used across all industries due to their chemical resistance and cost. PVC solenoid valves are the most common plastic material selection, but it is important to understand your media to pick the correct one.... Read more Read more

There are 415 products
Show 415 products
Product Brand Connection size Voltage Material Seal material Valve ports/positions Function Operation Recommended for Electrical connection Max pressure (bar) Connection type Features Material quality Valve bore (mm) Kv value (m3/h) Degree of protection (IP) Max temperature (°C) Min temperature (°C) Nominal power (VA) Approval Min pressure difference (bar) Model Coil type Max. ambient temp. (°C) Duty cycle Peak power (VA) Voltage-type
Solenoid Valve RPE 1/2''...
In stock
RPE 1/2 inch 12 V DC Plastic NBR (nitrile rubber) 2/2 way Normally closed Indirect Air, Alcohols, Combustible... Faston 6.3 mm x 0.8 mm 10 Inner thread cylindrical... Energy efficient (under 9 VA) Polyamide (PA) 11 0.96 IPX0 60 0 6.3 Drinking water 0.2 Straight R-series 60 100% - -
Solenoid Valve RPE 1/2''...
In stock
RPE 1/2 inch 230 V AC Plastic NBR (nitrile rubber) 2/2 way Normally closed Indirect Air, Alcohols, Combustible... Faston 6.3 mm x 0.8 mm 10 Inner thread cylindrical... Energy efficient (under 9 VA) Polyamide (PA) 11 0.96 IPX0 60 0 8.4 Drinking water 0.2 Straight R-series 60 100% - -
Solenoid Valve 100-HV Rain...
In stock
Rain Bird 1 inch 24 V AC Plastic NBR (nitrile rubber) 2/2 way Normally closed Indirect Air, Combustible gases,... - 10 Inner thread cylindrical... Energy efficient (under 9 VA) Polypropylene (PP) 30 - - 43 0 2.4 - 1 Straight - 50 100% 7 -
Solenoid Valve RPE single...
In stock
RPE 3/4 inch, 10 mm 230 V AC Plastic NBR (nitrile rubber) 2/2 way Normally closed Indirect Air, Alcohols, Combustible... Faston 6.3 mm x 0.8 mm 10 Hose pillar, Outer thread... Energy efficient (under 9 VA) Polyamide (PA) 10 1.21 IPX0 60 0 8.4 Drinking water 0.2 Straight R-series 60 100% - -
Solenoid Valve RPE 1/2''...
In stock
RPE 1/2 inch 24 V DC Plastic NBR (nitrile rubber) 2/2 way Normally closed Indirect Air, Alcohols, Combustible... Faston 6.3 mm x 0.8 mm 10 Inner thread cylindrical... Energy efficient (under 9 VA) Polyamide (PA) 11 0.96 IPX0 60 0 6.3 Drinking water 0.2 Straight R-series 60 100% - -
Solenoid Valve RPE 1/4''...
In stock
RPE 1/4 inch 12 V DC Plastic NBR (nitrile rubber) 2/2 way Normally closed Indirect Air, Alcohols, Combustible... Faston 6.3 mm x 0.8 mm 10 Inner thread cylindrical... Energy efficient (under 9 VA) Polyamide (PA) 11 0.95 IPX0 60 0 6.3 Drinking water 0.2 Straight R-series 60 100% - -
Solenoid Valve 100-HVF Rain...
In stock
Rain Bird 1 inch 24 V AC Plastic NBR (nitrile rubber) 2/2 way Normally closed Indirect - - 10 Inner thread cylindrical... Energy efficient (under 9 VA) Polypropylene (PP) 30 - - 43 0 2.4 - 1 Straight - 50 100% 7 -
Solenoid Valve DF-SA 1''...
In stock
JP Fluid Control 1 inch 230 V AC Plastic EPDM 2/2 way Normally closed Semi-direct Alcohols, Demineralized... DIN-A 8 Inner thread cylindrical... - Polyamide (PA) 25 10.24 IP65 80 -30 33 - 0 Straight CS2 50 100% - AC
Solenoid Valve RPE 1/2''...
In stock
RPE 1/2 inch 24 V AC Plastic NBR (nitrile rubber) 2/2 way Normally closed Indirect Air, Alcohols, Combustible... Faston 6.3 mm x 0.8 mm 10 Inner thread cylindrical... Energy efficient (under 9 VA) Polyamide (PA) 11 0.96 IPX0 60 0 7.2 Drinking water 0.2 Straight R-series 60 100% - -
Solenoid Valve RPE single...
In stock
RPE 3/4 inch, 10 mm 24 V DC Plastic NBR (nitrile rubber) 2/2 way Normally closed Indirect Air, Alcohols, Combustible... Faston 6.3 mm x 0.8 mm 10 Hose pillar, Outer thread... Energy efficient (under 9 VA) Polyamide (PA) 10 1.21 IPX0 60 0 6.3 Drinking water 0.2 Straight R-series 60 100% - -
In stock
JP Fluid Control 1/4 inch 24 V DC Plastic EPDM 2/2 way Normally closed Direct Air, Alcohols, Combustible... DIN-A 13 Inner thread cylindrical... - Polyamide (PA) 3 0.2 IP65 100 0 13 - 0 Straight CS1 50 100% - -
Solenoid Valve ST-DA 1/4''...
In stock
JP Fluid Control 1/4 inch 24 V DC Plastic FKM (FPM) 2/2 way Normally closed Direct Alcohols, Carbon dioxide,... DIN-A 8 Inner thread cylindrical... - Polyamide (PA) 3 0.2 IP65 80 0 13 - 0 Straight CS1 50 100% - -
Solenoid Valve DF-SA 3/4''...
In stock
JP Fluid Control 3/4 inch 230 V AC Plastic EPDM 2/2 way Normally closed Semi-direct - DIN-A 8 Inner thread cylindrical... - Polyamide (PA) 20 6.48 IP65 80 -30 33 - 0 Straight CS2 50 100% - AC
Solenoid Valve RPE 1/4''...
In stock
RPE 1/4 inch 24 V DC Plastic NBR (nitrile rubber) 2/2 way Normally closed Indirect Air, Alcohols, Combustible... Faston 6.3 mm x 0.8 mm 10 Inner thread cylindrical... Energy efficient (under 9 VA) Polyamide (PA) 11 0.95 IPX0 60 0 6.3 Drinking water 0.2 Straight R-series 60 100% - -
Solenoid Valve RPE 1/4''...
In stock
RPE 1/4 inch 230 V AC Plastic NBR (nitrile rubber) 2/2 way Normally closed Indirect Air, Alcohols, Combustible... Faston 6.3 mm x 0.8 mm 10 Inner thread cylindrical... Energy efficient (under 9 VA) Polyamide (PA) 11 0.95 IPX0 60 0 8.4 Drinking water 0.2 Straight R-series 60 100% - -
plastic solenoid valves

plastic solenoid valves

Plastic solenoid valves are widely used across all industries due to their chemical resistance and cost. PVC solenoid valves are the most common plastic material selection, but it is important to understand your media to pick the correct one. Typically the valves are "normally closed", meaning with no power they are closed. This is ideal for applications where the valves are only occasionally turned on to conserve power or for fail-safe reasons. "Normally open" and bi-stable plastic solenoid valves are also options. Various connection types (threaded, hose pillar, push-in, sleeve, flanged, etc.) are available to quickly connect your valve to your hose, pipe, or component.

Material Quality

PVC solenoid valves are the most common as they are suitable for corrosive and non-corrosive media (seawater, most acids and bases, salt solutions, and organic solvents) and are lower in cost. However, plastic typically has a low pressure and temperature rating compared to a metal valve. All plastic options are below and can be filtered out above:

  • Polyvinylidene fluoride (PVDF)
  • Teflon (PTFE)
  • Polypropylene (PP)
  • Polyamide (PA)
  • Polyvinyl chloride (PVC)